This package includes a brand-new set of RC plane parts, comprising the following components:

SG90 9G Servo: - Dimensions: Approximately 21.5 x 11.8 x 22.7mm (0.8 x 0.5 x 0.9 inches) - Weight: 9g (0.3oz) - No-Load Speed: 0.12 seconds per 60 degrees (at 4.8V) - Blocking Torque: 1.5-1.7kg/cm (at 4.8V-6V) - Working Temperature: -30°C to +60°C - Dead Zone Setting: 5 microseconds - Working Voltage: 4.8V-6V

A2217 2300KV Brushless Motor: - Dimensions: Approximately 27.8 x 32mm (1.1 x 1.3 inches) - Weight: 68g (2.4oz) - Shaft Diameter: Approximately 4mm (0.2 inches)

Recommended Propellers: - 2217-1100kV: 11 or 10 inches, e.g., 1155, 1070, 1060, etc. - 2217-1250kV: 9-inch, e.g., 9050, 9045, 9060, etc. - 2217-2300KV: 6 inches, e.g., 6040, etc.

40A ESC (Electronic Speed Controller): - Types: Long, short - Current: 40A - Output Capacity: Continuous 40A, short 55A (not less than 10 seconds) - Power Input: 2-4 lithium batteries (not included) - BEC Output: 5V@3A (Linear voltage regulator mode) - Maximum Speed: 210,000 RPM for 2-pole motor, 7,000 RPM for 6-pole motor, and 35,000 RPM for 12-pole motor - Dimensions: Approximately 68 x 25 x 8mm (2.7 x 1 x 0.3 inches)

Package Contents: - 2 x 9G SG90 Servo - 1 x A2212 KV2300 Brushless Motor - 2 x 6035 Propeller - 2 x Propeller Gasket - 1 x 40A ESC

Notes: 1. Please allow for a 0.5-2cm error due to manual measurement. 2. Actual item color may differ slightly from the photos due to monitor calibration differences.

The micro servo, weighing 9 grams, has a torque of 1.5kg/cm, a translucent body, and is lightweight and low-noise, making it a wonderful upgrade accessory.

The 40A ESC has comprehensive functions, such as low-voltage cutoff, overheat protection, and throttle signal loss protection, which can help better control your RC models.

The RC brushless motor is compatible with a variety of lithium batteries and can be adjusted to suit different brushless motors. It is reliable and durable for long-term use.

For safety, the motor will not rotate when connected to the battery, regardless of the throttle position. The throttle calibration function also allows the throttle range to be adjusted to be compatible with different transmitters.

The ESC supports various programming methods, including the use of an emitting rod or LED program card, making it easy to operate both at home and on the go. Additionally, it is straightforward and convenient to install.

product information: